Servo-motor and LED-light controller
- At: Taoyuan Art x Technology festival, Taiwan
- By: Tuomo Tammenpää
- For: Dimension Plus
- In: October 2017
Motococo is a small servomotor and LED light controller that is based on ATiny85 chip with an audio bootloader. It is a circuit modification from 8BitMixtape project like the Neocococat, but designed to drive two hobby servos and longer chain of neopixel RGB LEDs. It has a input socket for one analog sensor and line-level audio out pins for easy speaker connection.
- ATtiny85 with audio bootloader
- 2x 3-pin hobby servo ports
- 3x Neopixels on board plus 3pin socket of connecting more LEDs
- Two-pin audio out port, ready for line-level audio out
- Socket for LiPo batttery
- Small formfactor, inexpensive BOM
Motococo uses the Chris Micro’s audio bootloader firmware known from 8Bitmixtape, which allows updating the code by playing back a specific wav file to it. This allows easy change of premade code-patches, without the need to setup a laptop or developmenent environment like Arduino IDE. The code examples are wav audio files and can be “uploaded” to the board using for example a mobile phone and a web browser.
Motococo is continuation for learning a fest, open source software and hardware toolchain and method for designing and making small series PCB’s. Motococo was developed in Dimension Plus Taipei for a servo-motor controller workshop need for TAxT, Taoyuan Art x Technology Festival. 3x Motococo boards were used also in Dalsburk, Finland in mÖrkö 2017 November lightfestival for controlling a “lighpixel” LED light installation, driving 20 Neopixels each.